Product display
PRODUCTS
PRODUCTS
Strong Products
Founded in 2000, focusing on metal material modification, metal material development and application and shape control processing services, intelligent heat treatment equipment, robots and intelligent equipment manufacturing.
Bright annealing line for Stainless steel tube
Austenitic stainless steel is softened by solution treatment. Generally, the stainless steel pipe is heated to 950-1150 ℃ for a period of time, so that carbides and various alloy elements are fully and evenly dissolved in austenite, and then rapidly quenched for cooling. Carbon and other alloy elements are too late to precipitate to obtain pure austenite structure, which is called solution treatment. There are three functions of solution treatment: 1. It is particularly important for raw materials to make the structure and composition of steel pipes uniform, because the rolling temperature and cooling speed of each section of hot-rolled wire rod are different, resulting in different structure. At high temperature, the atom activity is intensified, σ phase dissolves, chemical composition tends to be uniform, and uniform single-phase structure is obtained after rapid cooling. 2. Eliminate work-hardening to facilitate continuous cold work. Through solution treatment, the distorted lattice is restored, the elongated and broken grains are recrystallized, the internal stress is eliminated, the tensile strength of the steel tube is decreased, and the elongation is increased. 3. Restore the inherent corrosion resistance of stainless steel. Due to the carbide precipitation and lattice defect caused by cold working, the corrosion resistance of stainless steel decreased. After solution treatment, the corrosion resistance of the steel pipe is restored to a proper state. For stainless steel pipes, the three elements of solution treatment are temperature, heat preservation time and cooling speed. The solution temperature is mainly determined by chemical composition. Generally speaking, the solid solution temperature of alloy with many kinds and high content should be increased accordingly. Especially for the steel with high content of manganese, molybdenum, nickel and silicon, the softening effect can be achieved only by raising the solution temperature and making it fully dissolved. However, for the stabilized steel, such as 1Cr18Ni9Ti, the carbide of the stabilized element is fully dissolved in austenite when the solution temperature is high, and precipitates at the grain boundary in the form of Cr23C6 in the subsequent cooling, resulting in intergranular corrosion. In order to keep the carbide (TiC and Nbc) of the stabilized element from decomposition and solid solution, the lower limit of solid solution temperature is generally adopted. Stainless steel as the saying goes is not easy to rust steel, in fact, there is a part of stainless steel, which contains both rust resistance and acid resistance (corrosion resistance). Stainless steel's rust resistance and corrosion resistance are due to the formation of chromium rich oxide film (passivation film) on its surface. Among them, rust resistance and corrosion resistance are relative. The results show that steel in weak medium such as atmosphere, water and oxidizing medium such as nitric acid, which corrosion resistance will enhance with the increase of chromium content in steel, and is in a positive proportion. When the content of chromium reaches a certain proportion, the corrosion resistance of steel changes abruptly, that is, from easy to not easy to rust, from non corrosion to corrosion resistance.
View Details
Conveyor Belt Furnace (Guanghui Furnace)
The Conveyor Belt Furnace (also known as Guanghui Furnace) of STRONG TECHNOLOGY, with its unique design concept, simple equipment, reasonable structure, bridge type placement of workpieces, internal furnace pressure makes air not easy to enter;
View Details
The Main applications of Conveyor Belt Furnace: Hardware hardening, carburizing, tempering, brazing, sintering, quenching and cooling
View Details
Muffle for Conveyor Belt furnace
The compound corrugated muffle structure and the Muffle developed by Outokumpu in Sweden, adopt imported high temperature resistant nickel base materials,designed to cope with extreme heat challenges. The corrugated muffle has the extension performance, which is more suitable for the influence of thermal expansion and cold shrinkage
View Details
Customized PVD coating machine for your products
It has successfully developed vacuum coating technology machine, which has been widely used in the mould, mobile phone, decorative materials and other high-end fields. The professional team customized for you to make your products more dazzling.
View Details
Vacuum multi arc ion plating coating machine
Our company provides vacuum Multi-Arc Ion Plating Technology and Multi-Arc Ion Plating Vacuum Equipment, which has been put into production. Order number: 0757-23322638
View Details
Precision Controlled Atmosphere Pit Carburizing Furnace
various types of parts, flexible production, pit furnace is suitable for long shaft and other workpieces, from simple independent heat treatment furnace to the most complex system, accurate data analysis plays a solid role in product traceability and stability.
View Details
Muffle for Mesh-Belt Furnace: This is the quenched and tempered Muffle for Mesh-Belt Furnace. It needs to be measured. It is a non-standard product. And it can be customized for customers and has a long service life. The mesh-belt furnace of STRONG TECHNOLOGY is used in automobile, bearing, hardware accessories and other industries.
View Details
Hotline
Business docking E-mail
Company Address
No.30, Shizhou Industrial Zone, Chencun Town, Shunde District, Foshan City, Guangdong Province