19
2020
-
08
STRONG die casting mould steel out of the "boundary" to get "good results"
Before determining the feeding scheme of the mould, we must "get out" and get rid of the "bondage" to see clearly and comprehensively and get the correct results. Jump out of the "boundary" to get the "right result"!
-- Determination of feeding scheme for die casting mould
Author: Li Zelin (Senior die casting mould consultant of STRONG)
When designing the feeding scheme of mould, try to get rid of the bondage of "intuition" or "inertia thinking". List all "possible" and "impossible" schemes for comprehensive analysis and comparison. Only in this way can we ensure to the maximum extent that the best scheme is adopted. In addition, it is definitely a good way to solve the problem of inexperience.
Example 1
Scheme 1↓
Scheme 2↓
Scheme 3↓
It is difficult to avoid the aeration of the small plane in scheme 1, and the last filling of the hemispherical top in scheme 2. Only scheme 3, not only can avoid the above two situations completely, but also can control the whole filling state well. Therefore, after comparison and analysis, scheme 3 is the best.
—————————————————————————————————————————————————————————————————
Example 2
Scheme 1↓
Scheme 2↓
Scheme 3↓
Scheme 4 ↓
Both scheme 1 and scheme 2 inevitably form aeration at the top of the boss. Both scheme 3 and scheme 4 can solve this problem. Compared with this two schemes, the process of scheme 3 is longer and the number of refractions is more. The flow of scheme 4 is short, the number of refractions is less, and the flow pattern is easy to control. Therefore, after comparison and analysis, scheme 4 is the best.
—————————————————————————————————————————————————————————————————
Example 3
Scheme 1 ↓
Scheme 2 ↓
In scheme 1, the water inflow is too narrow and the flow rate is not enough to meet the filling requirements. The scheme 2 has very high requirements for the design of flow channel. If there is a slight deviation, there will be trapped gas. And the adjustable process space is limited. Therefore, both schemes are not ideal.
Scheme 3↓
Scheme 4 ↓
The aisle in the middle of scheme 3 lengthens the filling process, which is not conducive to the transmission of pressure. When eddy current is generated on both sides of the product at last, it is impossible to eliminate die casting defects by increasing the pressure. Scheme 4 can solve these problems completely. Moreover, the structure is very compact. Therefore, after comparison and analysis, scheme 4 is the most reasonable.
—————————————————————————————————————————————————————————————————
Example 4
Scheme 1↓
Scheme 2 ↓
Scheme 3↓
The biggest difficulty of this device is to solve the problem of filling on both sides of A and B, and to avoid gas trapping. In the scheme 3, a small slope is specially added to the feed liquid, which successfully solves the problem. And other solutions, even if added slope, also impossible to achieve. Therefore, the scheme 3 is the most reasonable.
—————————————————————————————————————————————————————————————————
Example 5
Before determining the feeding scheme of the mould, we must "get out" and get rid of the "bondage" to see clearly and comprehensively and get the correct results. Jump out of the "boundary" to get the "right result"!
Service hotline｜+86-0757-23322638
Website｜http://en.strong-ht.com/
Address｜No.32 Shizhou Industrial Zone, Chencun Town, Shunde District, Foshan City, Guangdong Province
Keywords: continuous stainless steel strip annealing furnace
Strong Technology Successfully Holds First Half 2026 Work Summary Conference
The meeting commenced with the solemn national anthem. After the official start, the heads of various departments—including the Metal Products Business Unit, Strip Equipment Business Unit, International Business Unit, and Intelligent Equipment Business Unit—delivered their respective work summary reports for the first half of 2026. They comprehensively reviewed the achievements made during this period, candidly addressed challenges that still need to be overcome, and clearly outlined the objectives and tasks for the second half of the year.
2026-07-04
Strong Technology has been deeply engaged in the field of metal intelligent manufacturing for many years, consistently focusing on the R&D, production, and service of high-end stainless steel equipment and products. With outstanding product strength, professional technical expertise, and attentive service, the company has won the trust and praise of its customers and industry peers.
2026-05-22
Hotline
Business docking E-mail
Company Address
No.30, Shizhou Industrial Zone, Chencun Town, Shunde District, Foshan City, Guangdong Province